Simpson Strong-Tie

Drill it. Drive it. Forget it.

Titen HD screw anchors are a trusted anchor solution because they offer the performance that specifiers need and the ease of installation that contractors demand. The Titen HD stainless-steel screw anchor for concrete and masonry sets the new standard for when the job calls for installation in multiple types of environments. It is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for an unsurpassed peace-of-mind.

Innovative Design — The serrated carbon-steel threads on the tip of the stainless-steel Titen HD are vital because they undercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlock with the concrete. In order for these threads to be durable enough to cut into the concrete, they are formed from carbon steel that is then hardened and brazed onto the tip of the anchor.

Corrosion Resistant — For dry, interior applications, carbon-steel corrosion is not a risk, but in any kind of exterior, coastal or chemical environment the anchor would be susceptible to corrosion. With the introduction of the THDSS, there is a state-of-the-art anchor solution that combines the corrosion resistance of Type 300 Series stainless steel with the undercutting ability of heat-treated carbon-steel cutting threads.

Type 300 Series stainless-steel screw anchors have different corrosion-resistant properties for different environments. When matched to the appropriate environment and application, anchors made from Type 300 Series stainless steel will resist the effects of corrosion and maintain their strength and integrity. Type 316 is the optimal choice for applications in corrosive or extreme environments such as salt water, or when chemical or corrosive solutions are present. Type 304 is a cost-effective solution for less extreme applications where the environment may be wet, moist or damp.

ETR Concrete Repair and Paste-Over Epoxy

ETR is a fast-curing epoxy used to paste-over and seal cracks while securing injection ports to the surface of concrete substrates prior to injecting an epoxy or urethane crack repair product. When properly mixed, the product will be a uniform gray color and can be left in place or removed after the repair is complete. Also ideal for small concrete repairs and miscellaneous patching. Packaged as a kit in separate 8 oz. canisters which are mixed manually to yield 16 ounces of epoxy.

Key Features

  • 1:1 two component, high solids, epoxy amine based adhesive
  • Mixed material is a uniform gray color
  • Non-sag paste consistency for horizontal, vertical or overhead applications
  • Fast cure times for shorter times between paste-over and injection
  • Canisters are mixed manually and do not require dispensing tool
  • Each package contains enough material to cover approximately eight lineal feet of cracks
  • Volatile organic compound (VOC) — 7 g/L
  • Available in two 8 fl. oz. canisters
  • Manufactured in the USA using global materials